it’s worth noting that CFA stopped donating to queerphobic organizations awhile back, has a DEI department now, and is one of the few fast food chains not on the BDS boycott list for Palestine. like I get that hating on 'em is a meme but they have good fries and are less problematic than half the other fast food chains at this point…

the cool thing is these are turret-grade autocannons, not the shoulder-fired version, so they have enough armor pen and damage to handle even heavies given enough hits.

nope!

Surely some action by the Biden administration is far enough beyond the pale to make you look for a different option, right?

many liberals do not have a cutoff point here. if Democrats were having people executed in the streets, they would argue that more people would be executed in the streets under Republicans, so leftists who don’t vote Democrat are morally bankrupt and effectively on the side of the Republicans.

oh, wait, that’s literally their argument for this election, it’s just that said streets and people happen to not be the good ol’ US of A.

It certainly is in some ways; can’t get through a given week without questioning whether maybe I’m just cis and want to be unique or a binary trans woman in denial. But on the other hand, I do have my feeling of simply not fitting into the gender binary to fall back on, which is there even when gender dysphoria and euphoria are not.

As somebody transfeminine and nonbinary, this really spoke to me. I think part of why it took me so long to figure out I’m trans is that I don’t want to be super femme 90%+ of the time, I just want to throw on jeans and a tee and not be read as male. Like I’m nonbinary, but I want to present as a tomboy or as close to nonbinary on a female base form as I can get, if that makes sense?

Anyways the article was excellent and I’m glad I read it.

Big recommend to just jump straight to OrcaSlicer. It has Bambu Studio’s much-improved-over-PrusaSlicer UI but with features ported in from PrusaSlicer and SuperSlicer and compatibility with non-Bambu printers.

Are you saying that AR’s consent laws are fucked or that sex with a minor is A-okay if it’s legal where somebody lives?

man who had sex with a minor

The terms “pedophile” and “rapist” exist, why use such soft terms to describe such an awful human?

This is fantastic. Is the file hosted anywhere?

Plus it’s an affordable giant plushie, so it’s great for people who want something big and soft to cuddle, like say trans people on new hormones going through big emotions.

This is definitely not true of OrcaSlicer, at least not anymore. I’m running an 0.6mm nozzle and 120% layer width at 0.2mm layer height results in 0.72mm line width, not 0.24mm.

Another OrcaSlicer user here. Started off with PrusaSlicer and switched over at a friend’s recommendation, and honestly am so glad I did (it has a much nicer UI and some really neat features ported over from SuperSlicer).

These look great! Can we get a link to the design, please?

EDIT: nvm, found it!

When I ask about my gender on StackExchange, people tell me to just use Arch, but I don’t think I’m fully a trans woman?

Thanks, and good luck! In Orca, I set it to all walls fuzzy, 0.5mm between points, and 0.2mm depth, and I like the results.

Thanks for showing us this! I printed one with “fuzzy skin” and it is so cool (unfortunately doesn’t show up well in photos though).

In my experience, Better Help doesn’t provide a worthwhile service. They charge around $300/mo and will postpone and cancel your appointments so you end up getting in one, maybe two, appointments in a month, but with the added stress of needing to work your schedule around their shitty time management. My partner tried them out for a couple months out of desperation at the lack of local therapists who take our insurance and it was a net negative for her.

SV06 Plus, SV07, and SV07 Plus all use the same nozzles. However, I think standard volcano nozzles would also work – I just haven’t bothered to try since I bought a five-pack of the proprietary nozzles off AliExpress and they work perfectly fine.

Yes, adaptive cubic varies the density of the cubic structure to decrease filament usage while supposedly maintaining the same strength as normal cubic. And, in my own experience, gyroid always takes longer to print than adaptive cubic – sometimes it only adds a few minutes, but I’ve seen it add nearly half of the print time again for infill-heavy prints.