How much 3D printer can you get for just 72€?Thanks to #anycubic #anycubickobra2pro for sponsoring this video! Check out the Kobra 2 Pro at http://amzn.to/48...
You can find a piece of paper in your house anywhere basically for free. They’re held to a pretty tight 0.08mm thickness, and given how little leveling actually plays a part in a successful print, it really is a swindle.
I run a 3D printer repair shop in Central Florida, and 99/100, a customers “leveling issue” is a hotend flow issue (broken idler arm, loose drive gear), or a machine assembly issue instead (loose/floaty bed, x gantry, x carriage, etc).
In most cases, I tram by eye - as there is no need to be 0.01mm accurate across a 230mm bed on a machine that cost $100.
You can find a piece of paper in your house anywhere basically for free. They’re held to a pretty tight 0.08mm thickness, and given how little leveling actually plays a part in a successful print, it really is a swindle.
I run a 3D printer repair shop in Central Florida, and 99/100, a customers “leveling issue” is a hotend flow issue (broken idler arm, loose drive gear), or a machine assembly issue instead (loose/floaty bed, x gantry, x carriage, etc).
In most cases, I tram by eye - as there is no need to be 0.01mm accurate across a 230mm bed on a machine that cost $100.