Actually, Blu-ray should have an obscenely long shelf life. If I understand correctly, it doesn’t use an organic layer for holding data and is a lot like an M-Disc in terms of lifespan.
Both of you are using very confusing terms. Physical disks are stamped plastic. The 0’s and 1’s are physically in the plastic as pits and lands.
The problems with earlier disks and bad production run disks are that reflective backing oxidizes. But the physical data is still stamped into the disk.
Bluray changed out the aluminium reflective layer for a silver alloy so it’s more resistive there.
I don’t know where you got organic from or the other guy, film?
I’d probably start with this which describes the m-disc, which is made for longterm cold storage. If you check out the wiki for bluray it talks about how some forms use organic methods of writing. Check out Types > Bluray Disc recordable section:
On September 18, 2007, Pioneer and Mitsubishi codeveloped BD-R LTH (“Low to High” in groove recording), which features an organic dye recording layer that can be manufactured by modifying existing CD-R and DVD-R production equipment, significantly reducing manufacturing costs.
An optical disk recorder encodes (also known as burning, since the dye layer is permanently burned) data onto a recordable CD-R, DVD-R, DVD+R, or BD-R disc (called a blank) by selectively heating (burning) parts of an organic dye layer with a laser.
edit: also worth mentioning – my favorite podcast the Accidental Tech Podcast (which, be forewarned is Apple-centric) released an ep not too long ago discussing this. It’s part of their post-show on this ep and they use chapter markers, so you can skip basically right to it if you have a half decent podcast player. It’s not intended as an explainer video or anything, but having not thought about optical discs in quite a while it does serve as a half decent refresher.
So, I might have gotten this wrong, but it was my understanding that CDs and DVDs (at least the writable kind) use an organic (carbon-based) layer for data storage, which is why CDs and DVDs succumb to disc rot over time. Blu-ray, however, shouldn’t have that issue because they don’t use an organic layer. I might have misunderstood that though.
Writable cds and dvds use a bunch of different technologies, but they are an aside to the conversation here.
Disk rot when it’s used is generally always used when talking about pressed disks not writable disks. Dvds, cds and blurays all use variations on the same technology which is stamped plastic with a reflective layer at the back made out of a metal. No organics.
Actually, Blu-ray should have an obscenely long shelf life. If I understand correctly, it doesn’t use an organic layer for holding data and is a lot like an M-Disc in terms of lifespan.
Both of you are using very confusing terms. Physical disks are stamped plastic. The 0’s and 1’s are physically in the plastic as pits and lands.
The problems with earlier disks and bad production run disks are that reflective backing oxidizes. But the physical data is still stamped into the disk.
Bluray changed out the aluminium reflective layer for a silver alloy so it’s more resistive there.
I don’t know where you got organic from or the other guy, film?
I’d probably start with this which describes the m-disc, which is made for longterm cold storage. If you check out the wiki for bluray it talks about how some forms use organic methods of writing. Check out Types > Bluray Disc recordable section:
In any case, optical discs are not really “stamped” it is generally burned using a type of laser, and usually on to an organic dye, though that is what the posters your replying to are talking about:
edit: also worth mentioning – my favorite podcast the Accidental Tech Podcast (which, be forewarned is Apple-centric) released an ep not too long ago discussing this. It’s part of their post-show on this ep and they use chapter markers, so you can skip basically right to it if you have a half decent podcast player. It’s not intended as an explainer video or anything, but having not thought about optical discs in quite a while it does serve as a half decent refresher.
No, optical disks are indeed stamped. You are talking about recordable disks. Which are different thing entirely.
oh, gotcha. I think once someone started talking about m-disc I basically defaulted to thinking about recordable discs.
So, I might have gotten this wrong, but it was my understanding that CDs and DVDs (at least the writable kind) use an organic (carbon-based) layer for data storage, which is why CDs and DVDs succumb to disc rot over time. Blu-ray, however, shouldn’t have that issue because they don’t use an organic layer. I might have misunderstood that though.
Writable cds and dvds use a bunch of different technologies, but they are an aside to the conversation here.
Disk rot when it’s used is generally always used when talking about pressed disks not writable disks. Dvds, cds and blurays all use variations on the same technology which is stamped plastic with a reflective layer at the back made out of a metal. No organics.
Thanks! I didn’t know that, I assumed normal discs were just pre-written [disc]-R with special printing on the label.
Does that mean pressed discs can be potentially fixed by carefully peeling off the metallic layer and applying a new one?