…It was about ten minutes after I saw that my “ridiculous low-ball” Ebay bid for a branded battlecruiser had won. That said, it is way snappier (and louder) than any rubber dome I’ve ever used. It’s not a bad board at all, really, though the terminal scan code set it was flashed with means the converter is more or less mandatory, despite the board having a PS/2 connector.

  • ProdigalFrog@slrpnk.net
    link
    fedilink
    English
    arrow-up
    1
    ·
    6 days ago

    I used one of these for a while, and weirdly it’s the only keyboard I’ve ever used that gave me finger pain.

      • ProdigalFrog@slrpnk.net
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        6 days ago

        I suspect it was due to how much force is required to finally overcome the membrane, which caused a sharp and semi forceful drop as I bottomed out, and there’s not much squish or dampening to soften it. I think I’m a somewhat heavy typer though, so that likely compounded it.

        • wjrii@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          6 days ago

          Yeah, if you were using one of these rubber dome M’s, then the tactile event is firm and has quite the drop-off. I like it better than the average dome, but it’s not fuckin’ around.

    • wjrii@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      6
      ·
      edit-2
      1 month ago

      It’s electrically identical to a regular Model M, so almost certainly not. In looking into it, they changed three things:

      • dense little rubber domes in each key’s barrel instead of the buckling-spring assemblies
      • keycaps with stems that are mostly solid to actuate the domes. I put in a spare buckling spring keycap to see if it worked, and while nowhere near well enough to rely on, it snapped right in, and if you push hard enough it’ll actuate.
      • removed a thin sheet of rubber that cushioned the membrane from the plastic flippers attached the buckling springs.

      That’s it. Same controllers, same membranes, even the same cases.

      • blindbunny@lemmy.ml
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 month ago

        I always wanted a mech version but after I released it has no rollover I lost interest. Thanks for sharing though. You’re right I didn’t even know these were real.

        • wjrii@lemmy.worldOP
          link
          fedilink
          arrow-up
          4
          ·
          edit-2
          1 month ago

          If you want it badly enough, there’s the pricy “New Model F” capacitive buckling spring boards, and they have all three Model M layouts.

          • blindbunny@lemmy.ml
            link
            fedilink
            English
            arrow-up
            4
            ·
            1 month ago

            Ugh why did you tell me about this? You’re working for them aren’t you, you esoteric keyboard shill 😜

            • wjrii@lemmy.worldOP
              link
              fedilink
              arrow-up
              3
              ·
              1 month ago

              lol, I have a lot of keyboards, many homemade, but I don’t think I’ve spent over a hundred bucks or so on any single one of them, and most are closer to half that. No Model F of any kind here, much less a new one.

  • Mandarbmax@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    1 month ago

    Ya, they aren’t as special as the buckling springs ones, but dome model Ms still are kick ass keyboards and I’m glad to see this one is in a loving home doing what it does best!